StarTech.com USBDUP15 Instrukcja Obsługi Pobierz pdf (Strona 10)

Instruction Manual

2. Once the copy has completed, the green LED will stop blinking. The destination

Flash drive can be removed and a new Flash drive inserted, then the copy will

automatically start again. The LCD display will show the accumulated quantity of the

successful/failed duplications and the drive that is still copying.

NOTE:

a) When the copy is in progress, the green LED will ash for each Flash drive that is

connected. When the copy has nished, the green LED will stop ashing and remain

illuminated. If an error occurs, the red LED will illuminate.

b) Do NOT remove the Flash drive while the system is copying (green LED is ashing).

c) Once the copy process has completed (green LED is solid), you can then take out

that Flash drive and insert a new one.

d) During an Asynchronous copy, you can press the up and down arrows to check each

Flash drive’s copy status and progress. This works both during a copy (green LED

ashing) and when there is an error (red LED solid).

2. Compare

Check the Flash drive after a copy has completed to ensure the copy has completed

successfully.

3. Copy + Compare

Automatically compares the Flash drive once the copy has completed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Brak uwag

StarTech.com USBDUP15 Instrukcja Obsługi Strona 10