StarTech.com PEX1000MMSC2 Instrukcja Obsługi Pobierz pdf (Strona 6)

Instruction Manual

Note: See the “Card to Card Direct Conguration” section on the following pages for

further detials on jumper conguration.

JP2 Jumper

Installation

Hardware Installation

WARNING! PCI Express cards, like all computer equipment, can be severely damaged

by static electricity. Be sure that you are properly grounded before opening your

computer case or touching your PCI Express card. StarTech.com recommends that you

wear an anti-static strap when installing any computer component. If an anti-static

strap is unavailable, discharge yourself of any static electricity build-up by touching a

large grounded metal surface (such as the computer case) for several seconds. Also be

careful to handle the PCI Express card by its edges and not the gold connectors.

1. Turn your computer o and any peripherals connected to the computer (i.e. Printers,

external hard drives, etc.). Unplug the power cable from the rear of the power

supply on the back of the computer and disconnect all peripheral devices.

2. Remove the cover from the computer case. See documentation for your computer

system for details.

3. Locate an open PCI Express slot and remove the metal cover plate on the rear of the

computer case (Refer to documentation for your computer system for details).

NOTE: This card will work in PCI Express slots of additional lanes (i.e.x4, x8, or x16

slots).

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Brak uwag

StarTech.com PEX1000MMSC2 Instrukcja Obsługi Strona 6